Avsnitt
-
In this episode, Mark starts milling walnut to make the new kitchen table. Bruce is intimidated by plan creation. Drew talks about his shop tour video. Plus, a ton more!
Mics: Lark M1: https://amzn.to/4dcwL6L
Lark M2: https://amzn.to/3Uffgu1
T-shirts: https://fishersshoponline.com/merch & https://www.bruceaulrich.com/shop/clothingSUBSCRIBE TO DIRTtoDONE on YouTube: http://tinyurl.com/DIRTtoDON
This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/
(we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!)
Become a patron of the show!
http://patreon.com/webuiltathing
OUR TOP PATREON SUPPORTERS:
-Tom's Woodwork
-Tim Morrill
-Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv
-Brent Jarvis: https://bit.ly/2OJL7EV
-Chris Simonton
-Maddux Woodworks YT: http://bit.ly/3chHe2p
-Byrom’s Custom Woodworks
-Ray Jolliff
-Ryder Clark
-Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/
-Henry Lootens (@Manfaritawood)
-Kris
-Ben Wilker with Wilker’s Woodcraft
-Bruce Clark
-Tommy Trease
-Will White
-Cody Elkins (maker of the Jenny bit)
-Monkey Business Woodworks
Support our sponsors:MagSwitch: https://mag-tools.com
-use code "WBAT" for 10% off
SurfPrep: https://www.surfprepsanding.com/?aff=48
-use code "BLACKFRIDAY2023" for 15% off & "CYBERMONDAY2023" for 15% off
Bits & Bits: use code "FISHER10" for 10% off
Starbond: use code "BRUCEAULRICH15" for 15% off
Rotoboss: "GUNFLINT"
Merlin Moisture Meters: https://www.merlin-humidification.com/wood-moisture-meters
Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off
Arbortech Carving Tools: "BRUCEAULRICH" for 10% off. (https://arbortechtools.idevaffiliate.com/127.html)
Montana Brand Tools: “GUNFLINT10”
Monport: “GUNFLINT6”
Stonecoat: "Gunflint" gets you 10% off
We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support)
https://amzn.to/2GP04jf
https://amzn.to/2TUrCr2
ETSY SHOPS:
Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486
Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766
Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect
Bruce's most recent video:
https://youtu.be/xRFe5bELcyE?si=rXBq3csbaaBq7quz
Drew's most recent video:
https://youtu.be/uVlsKXiIoXo?si=7C3E3sYKkZz6uPIV
Mark's most recent video:
https://youtu.be/a701NsPo4ss?si=96H_AiQVVNV1YvbL
We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between. CONNECT WITH US:
WE BUILT A THING: www.instagram.com/webuiltathing
WE BUILT A THING EMAIL: [email protected]
FISHER'S SHOP: www.instagram.com/fishersshop/
BRUDADDY: www.instagram.com/brudaddy/
GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesignsMusic by: Jay Fisher (Thanks, Jay!)
-
In this episode, Mark released his faux marble vanity top video. Bruce wrestles with his mower deck. Drew makes some end grain cutting boards. Plus, a ton more!
Mics: Lark M1: https://amzn.to/4dcwL6L
Lark M2: https://amzn.to/3Uffgu1
T-shirts: https://fishersshoponline.com/merch & https://www.bruceaulrich.com/shop/clothingSUBSCRIBE TO DIRTtoDONE on YouTube: http://tinyurl.com/DIRTtoDON
This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/
(we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!)
Become a patron of the show!
http://patreon.com/webuiltathing
OUR TOP PATREON SUPPORTERS:
-Tom's Woodwork
-Tim Morrill
-Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv
-Brent Jarvis: https://bit.ly/2OJL7EV
-Chris Simonton
-Maddux Woodworks YT: http://bit.ly/3chHe2p
-Byrom’s Custom Woodworks
-Ray Jolliff
-Ryder Clark
-Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/
-Henry Lootens (@Manfaritawood)
-Kris
-Ben Wilker with Wilker’s Woodcraft
-Bruce Clark
-Tommy Trease
-Will White
-Cody Elkins (maker of the Jenny bit)
-Monkey Business Woodworks
Support our sponsors:MagSwitch: https://mag-tools.com
-use code "WBAT" for 10% off
SurfPrep: https://www.surfprepsanding.com/?aff=48
-use code "BLACKFRIDAY2023" for 15% off & "CYBERMONDAY2023" for 15% off
Bits & Bits: use code "FISHER10" for 10% off
Starbond: use code "BRUCEAULRICH15" for 15% off
Rotoboss: "GUNFLINT"
Merlin Moisture Meters: https://www.merlin-humidification.com/wood-moisture-meters
Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off
Arbortech Carving Tools: "BRUCEAULRICH" for 10% off. (https://arbortechtools.idevaffiliate.com/127.html)
Montana Brand Tools: “GUNFLINT10”
Monport: “GUNFLINT6”
We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support)
https://amzn.to/2GP04jf
https://amzn.to/2TUrCr2
ETSY SHOPS:
Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486
Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766
Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect
Bruce's most recent video:
https://youtu.be/xRFe5bELcyE?si=rXBq3csbaaBq7quz
Drew's most recent video:
https://youtu.be/uVlsKXiIoXo?si=7C3E3sYKkZz6uPIV
Mark's most recent video:
https://youtu.be/a701NsPo4ss?si=96H_AiQVVNV1YvbL
We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between. CONNECT WITH US:
WE BUILT A THING: www.instagram.com/webuiltathing
WE BUILT A THING EMAIL: [email protected]
FISHER'S SHOP: www.instagram.com/fishersshop/
BRUDADDY: www.instagram.com/brudaddy/
GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesignsMusic by: Jay Fisher (Thanks, Jay!)
-
Saknas det avsnitt?
-
In this episode, Mark puts the new blind to use. Bruce sands the tip of his finger off. Drew delivers the pulpit. Plus, a ton more!
Mics: Lark M1: https://amzn.to/4dcwL6L
Lark M2: https://amzn.to/3Uffgu1
T-shirts: https://fishersshoponline.com/merch & https://www.bruceaulrich.com/shop/clothingSUBSCRIBE TO DIRTtoDONE on YouTube: http://tinyurl.com/DIRTtoDON
This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/
(we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!)
Become a patron of the show!
http://patreon.com/webuiltathing
OUR TOP PATREON SUPPORTERS:
-Tom's Woodwork
-Tim Morrill
-Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv
-Brent Jarvis: https://bit.ly/2OJL7EV
-The Mercury Woodworker
-Chris Simonton
-Maddux Woodworks YT: http://bit.ly/3chHe2p
-Byrom’s Custom Woodworks
-Ray Jolliff
-Ryder Clark
-Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/
-Henry Lootens (@Manfaritawood)
-Kris
-Ben Wilker with Wilker’s Woodcraft
-Bruce Clark
-Tommy Trease
-Will White
-Cody Elkins (maker of the Jenny bit)
-Monkey Business Woodworks
Support our sponsors:MagSwitch: https://mag-tools.com
-use code "WBAT" for 10% off
SurfPrep: https://www.surfprepsanding.com/?aff=48
-use code "BLACKFRIDAY2023" for 15% off & "CYBERMONDAY2023" for 15% off
Bits & Bits: use code "FISHER10" for 10% off
Starbond: use code "BRUCEAULRICH15" for 15% off
Rotoboss: "GUNFLINT"
Merlin Moisture Meters: https://www.merlin-humidification.com/wood-moisture-meters
Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off
Arbortech Carving Tools: "BRUCEAULRICH" for 10% off. (https://arbortechtools.idevaffiliate.com/127.html)
Montana Brand Tools: “GUNFLINT10”
Monport: “GUNFLINT6”
We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support)
https://amzn.to/2GP04jf
https://amzn.to/2TUrCr2
ETSY SHOPS:
Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486
Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766
Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect
Bruce's most recent video:
https://youtu.be/xRFe5bELcyE?si=rXBq3csbaaBq7quz
Drew's most recent video:
https://youtu.be/uVlsKXiIoXo?si=7C3E3sYKkZz6uPIV
Mark's most recent video:
https://youtu.be/a701NsPo4ss?si=96H_AiQVVNV1YvbL
We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between. CONNECT WITH US:
WE BUILT A THING: www.instagram.com/webuiltathing
WE BUILT A THING EMAIL: [email protected]
FISHER'S SHOP: www.instagram.com/fishersshop/
BRUDADDY: www.instagram.com/brudaddy/
GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesignsMusic by: Jay Fisher (Thanks, Jay!)
-
In this episode, Mark sets up the deer stand. Bruce puts the finishing touches on upstairs renovation. Drew experiments with a new drill press. Plus, a ton more!
T-shirts: https://fishersshoponline.com/merch & https://www.bruceaulrich.com/shop/clothingSUBSCRIBE TO DIRTtoDONE on YouTube: http://tinyurl.com/DIRTtoDON
This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/
(we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!)
Become a patron of the show!
http://patreon.com/webuiltathing
OUR TOP PATREON SUPPORTERS:
-Tom's Woodwork
-Tim Morrill
-Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv
-Brent Jarvis: https://bit.ly/2OJL7EV
-The Mercury Woodworker
-Chris Simonton
-Maddux Woodworks YT: http://bit.ly/3chHe2p
-Byrom’s Custom Woodworks
-Ray Jolliff
-Ryder Clark
-Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/
-Henry Lootens (@Manfaritawood)
-Kris
-Ben Wilker with Wilker’s Woodcraft
-Bruce Clark
-Tommy Trease
-Will White
-Cody Elkins (maker of the Jenny bit)
-Monkey Business Woodworks
New:
-Brian Mastel
-You Should See What I Just Saw
Support our sponsors:MagSwitch: https://mag-tools.com
-use code "WBAT" for 10% off
SurfPrep: https://www.surfprepsanding.com/?aff=48
-use code "BLACKFRIDAY2023" for 15% off & "CYBERMONDAY2023" for 15% off
Bits & Bits: use code "FISHER10" for 10% off
Starbond: use code "BRUCEAULRICH15" for 15% off
Rotoboss: "GUNFLINT"
Merlin Moisture Meters: https://www.merlin-humidification.com/wood-moisture-meters
Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off
Arbortech Carving Tools: "BRUCEAULRICH" for 10% off. (https://arbortechtools.idevaffiliate.com/127.html)
Montana Brand Tools: “GUNFLINT10”
Monport: “GUNFLINT6”
We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support)
https://amzn.to/2GP04jf
https://amzn.to/2TUrCr2
ETSY SHOPS:
Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486
Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766
Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect
Bruce's most recent video:
https://youtu.be/xRFe5bELcyE?si=rXBq3csbaaBq7quz
Drew's most recent video:
https://youtu.be/uVlsKXiIoXo?si=7C3E3sYKkZz6uPIV
Mark's most recent video:
https://youtu.be/a701NsPo4ss?si=96H_AiQVVNV1YvbL
We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between. CONNECT WITH US:
WE BUILT A THING: www.instagram.com/webuiltathing
WE BUILT A THING EMAIL: [email protected]
FISHER'S SHOP: www.instagram.com/fishersshop/
BRUDADDY: www.instagram.com/brudaddy/
GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesignsMusic by: Jay Fisher (Thanks, Jay!)
-
In this episode, Mark gets his sweet Jessem router table setup. Bruce finishes the flooring and plants a natural fence. Drew helps with a cabinet door and sees the most amazing model train set ever. Plus, a ton more!
T-shirts: https://fishersshoponline.com/merch & https://www.bruceaulrich.com/shop/clothing
SUBSCRIBE TO DIRTtoDONE on YouTube: http://tinyurl.com/DIRTtoDON
This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/
(we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!)
Become a patron of the show!
http://patreon.com/webuiltathing
OUR TOP PATREON SUPPORTERS:
-Tom's Woodwork
-Tim Morrill
-Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv
-Brent Jarvis: https://bit.ly/2OJL7EV
-The Mercury Woodworker
-Chris Simonton
-Maddux Woodworks YT: http://bit.ly/3chHe2p
-Byrom’s Custom Woodworks
-Ray Jolliff
-Ryder Clark
-Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/
-Henry Lootens (@Manfaritawood)
-Kris
-Ben Wilker with Wilker’s Woodcraft
-Bruce Clark
-Tommy Trease
-Will White
-Cody Elkins (maker of the Jenny bit)
-Monkey Business Woodworks
New:
pFeF Workshop
Support our sponsors:MagSwitch: https://mag-tools.com
-use code "WBAT" for 10% off
SurfPrep: https://www.surfprepsanding.com/?aff=48
-use code "BLACKFRIDAY2023" for 15% off & "CYBERMONDAY2023" for 15% off
Bits & Bits: use code "FISHER10" for 10% off
Starbond: use code "BRUCEAULRICH15" for 15% off
Rotoboss: "GUNFLINT"
Merlin Moisture Meters: https://www.merlin-humidification.com/wood-moisture-meters
Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off
Arbortech Carving Tools: "BRUCEAULRICH" for 10% off. (https://arbortechtools.idevaffiliate.com/127.html)
Montana Brand Tools: “GUNFLINT10”
Monport: “GUNFLINT6”
We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support)
https://amzn.to/2GP04jf
https://amzn.to/2TUrCr2
ETSY SHOPS:
Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486
Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766
Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect
Bruce's most recent video:
https://youtu.be/xRFe5bELcyE?si=rXBq3csbaaBq7quz
Drew's most recent video:
https://youtu.be/uVlsKXiIoXo?si=7C3E3sYKkZz6uPIV
Mark's most recent video:
https://youtu.be/a701NsPo4ss?si=96H_AiQVVNV1YvbL
We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between. CONNECT WITH US:
WE BUILT A THING: www.instagram.com/webuiltathing
WE BUILT A THING EMAIL: [email protected]
FISHER'S SHOP: www.instagram.com/fishersshop/
BRUDADDY: www.instagram.com/brudaddy/
GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesignsMusic by: Jay Fisher (Thanks, Jay!)
-
In this episode, Mark gets a spindle for his OneFinity. Bruce is laying more laminate flooring and ripping out carpet. Drew is milling walnut for the lecturn. Plus a ton more!
Walton Woodwork: https://www.instagram.com/walton_woodwork/ Solafide Designs KC: https://www.etsy.com/shop/SolaFideDesignsKc
T-shirts: https://fishersshoponline.com/merch & https://www.bruceaulrich.com/shop/clothingSUBSCRIBE TO DIRTtoDONE on YouTube: http://tinyurl.com/DIRTtoDON
This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/
(we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!)
Become a patron of the show!
http://patreon.com/webuiltathing
OUR TOP PATREON SUPPORTERS:
-Tom's Woodwork
-Tim Morrill
-Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv
-Brent Jarvis: https://bit.ly/2OJL7EV
-The Mercury Woodworker
-Chris Simonton
-Maddux Woodworks YT: http://bit.ly/3chHe2p
-Byrom’s Custom Woodworks
-Ray Jolliff
-Ryder Clark
-Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/
-Henry Lootens (@Manfaritawood)
-Kris
-Ben Wilker with Wilker’s Woodcraft
-Bruce Clark
-Tommy Trease
-Will White
-Cody Elkins (maker of the Jenny bit)
-Monkey Business Woodworks
Support our sponsors:MagSwitch: https://mag-tools.com
-use code "WBAT" for 10% off
SurfPrep: https://www.surfprepsanding.com/?aff=48
-use code "BLACKFRIDAY2023" for 15% off & "CYBERMONDAY2023" for 15% off
Bits & Bits: use code "FISHER10" for 10% off
Starbond: use code "BRUCEAULRICH15" for 15% off
Rotoboss: "GUNFLINT"
Merlin Moisture Meters: https://www.merlin-humidification.com/wood-moisture-meters
Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off
Arbortech Carving Tools: "BRUCEAULRICH" for 10% off. (https://arbortechtools.idevaffiliate.com/127.html)
Montana Brand Tools: “GUNFLINT10”
Monport: “GUNFLINT6”
We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support)
https://amzn.to/2GP04jf
https://amzn.to/2TUrCr2
ETSY SHOPS:
Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486
Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766
Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect
Bruce's most recent video:
https://youtu.be/xRFe5bELcyE?si=rXBq3csbaaBq7quz
Drew's most recent video:
https://youtu.be/uVlsKXiIoXo?si=7C3E3sYKkZz6uPIV
Mark's most recent video:
https://youtu.be/a701NsPo4ss?si=96H_AiQVVNV1YvbL
We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between. CONNECT WITH US:
WE BUILT A THING: www.instagram.com/webuiltathing
WE BUILT A THING EMAIL: [email protected]
FISHER'S SHOP: www.instagram.com/fishersshop/
BRUDADDY: www.instagram.com/brudaddy/
GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesignsMusic by: Jay Fisher (Thanks, Jay!)
-
In this episode, Mark survives a blizzard. Bruce put up a shiplap wall. Drew helped a friend with a bunch of plywood storage cubbies. Plus a ton more!
Jay Bates Video: https://youtu.be/Dvur03ZA3vU?si=sbdmGp9Nnqn_uxKI
T-shirts: https://fishersshoponline.com/merch & https://www.bruceaulrich.com/shop/clothing
PTrees Workshop CNC parts: https://tinyurl.com/bde4w9rSUBSCRIBE TO DIRTtoDONE on YouTube: http://tinyurl.com/DIRTtoDON
This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/
(we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!)
Become a patron of the show!
http://patreon.com/webuiltathing
OUR TOP PATREON SUPPORTERS:
-Tom's Woodwork
-Tim Morrill
-Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv
-Brent Jarvis: https://bit.ly/2OJL7EV
-The Mercury Woodworker
-Chris Simonton
-Maddux Woodworks YT: http://bit.ly/3chHe2p
-Byrom’s Custom Woodworks
-Ray Jolliff
-Ryder Clark
-Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/
-Henry Lootens (@Manfaritawood)
-Kris
-Ben Wilker with Wilker’s Woodcraft
-Bruce Clark
-Tommy Trease
-Will White
-Cody Elkins (maker of the Jenny bit)
-Monkey Business Woodworks
Support our sponsors:MagSwitch: https://mag-tools.com
-use code "WBAT" for 10% off
SurfPrep: https://www.surfprepsanding.com/?aff=48
-use code "BLACKFRIDAY2023" for 15% off & "CYBERMONDAY2023" for 15% off
Bits & Bits: use code "FISHER10" for 10% off
Starbond: use code "BRUCEAULRICH15" for 15% off
Rotoboss: "GUNFLINT"
Merlin Moisture Meters: https://www.merlin-humidification.com/wood-moisture-meters
Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off
Arbortech Carving Tools: "BRUCEAULRICH" for 10% off. (https://arbortechtools.idevaffiliate.com/127.html)
Montana Brand Tools: “GUNFLINT10”
Monport: “GUNFLINT6”
We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support)
https://amzn.to/2GP04jf
https://amzn.to/2TUrCr2
ETSY SHOPS:
Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486
Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766
Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect
Bruce's most recent video:
https://youtu.be/xRFe5bELcyE?si=rXBq3csbaaBq7quz
Drew's most recent video:
https://youtu.be/uVlsKXiIoXo?si=7C3E3sYKkZz6uPIV
Mark's most recent video:
https://youtu.be/a701NsPo4ss?si=96H_AiQVVNV1YvbL
We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between. CONNECT WITH US:
WE BUILT A THING: www.instagram.com/webuiltathing
WE BUILT A THING EMAIL: [email protected]
FISHER'S SHOP: www.instagram.com/fishersshop/
BRUDADDY: www.instagram.com/brudaddy/
GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesignsMusic by: Jay Fisher (Thanks, Jay!)
-
In this episode, Mark welds plastic. Bruce learns about SNails (screw nails). Drew's back sucks. Plus a ton more!
Plastic Welder: https://amzn.to/49WdXqu
T-shirts: https://fishersshoponline.com/merch & https://www.bruceaulrich.com/shop/clothing
ENTER THE ONEIDA GIVEAWAYS:
https://www.oneida-air.com/ulrich-giveaway
https://www.oneida-air.com/gunflint-designs-giveawaySUBSCRIBE TO DIRTtoDONE on YouTube: http://tinyurl.com/DIRTtoDON
This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/
(we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!)
Become a patron of the show!
http://patreon.com/webuiltathing
OUR TOP PATREON SUPPORTERS:
-Tom's Woodwork
-Tim Morrill
-Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv
-Brent Jarvis: https://bit.ly/2OJL7EV
-The Mercury Woodworker
-Chris Simonton
-Maddux Woodworks YT: http://bit.ly/3chHe2p
-Byrom’s Custom Woodworks
-Ray Jolliff
-Ryder Clark
-Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/
-Henry Lootens (@Manfaritawood)
-Kris
-Ben Wilker with Wilker’s Woodcraft
-Bruce Clark
-Tommy Trease
-Will White
-Cody Elkins (maker of the Jenny bit)
-Monkey Business Woodworks
Support our sponsors:MagSwitch: https://mag-tools.com
-use code "WBAT" for 10% off
SurfPrep: https://www.surfprepsanding.com/?aff=48
-use code "BLACKFRIDAY2023" for 15% off & "CYBERMONDAY2023" for 15% off
Bits & Bits: use code "FISHER10" for 10% off
Starbond: use code "BRUCEAULRICH15" for 15% off
Rotoboss: "GUNFLINT"
Merlin Moisture Meters: https://www.merlin-humidification.com/wood-moisture-meters
Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off
Arbortech Carving Tools: "BRUCEAULRICH" for 10% off. (https://arbortechtools.idevaffiliate.com/127.html)
Montana Brand Tools: “GUNFLINT10”
Monport: “GUNFLINT6”
We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support)
https://amzn.to/2GP04jf
https://amzn.to/2TUrCr2
ETSY SHOPS:
Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486
Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766
Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect
Bruce's most recent video:
https://youtu.be/xRFe5bELcyE?si=rXBq3csbaaBq7quz
Drew's most recent video:
https://youtu.be/uVlsKXiIoXo?si=7C3E3sYKkZz6uPIV
Mark's most recent video:
https://youtu.be/a701NsPo4ss?si=96H_AiQVVNV1YvbL
We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between. CONNECT WITH US:
WE BUILT A THING: www.instagram.com/webuiltathing
WE BUILT A THING EMAIL: [email protected]
FISHER'S SHOP: www.instagram.com/fishersshop/
BRUDADDY: www.instagram.com/brudaddy/
GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesignsMusic by: Jay Fisher (Thanks, Jay!)
-
In this episode, Mark tells all about how he did at the gun show. Bruce makes some sink drop-ins for a travel trailer out of black walnut. Drew is finishing up plans/files for his hexagon trays (Nerd trays). Plus a ton more!
T-shirts: https://fishersshoponline.com/merch & https://www.bruceaulrich.com/shop/clothing
ENTER THE ONEIDA GIVEAWAYS:
https://www.oneida-air.com/ulrich-giveaway
https://www.oneida-air.com/gunflint-designs-giveawaySUBSCRIBE TO DIRTtoDONE on YouTube: http://tinyurl.com/DIRTtoDON
This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/
(we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!)
Become a patron of the show!
http://patreon.com/webuiltathing
OUR TOP PATREON SUPPORTERS:
-Tom's Woodwork
-Tim Morrill
-Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv
-Brent Jarvis: https://bit.ly/2OJL7EV
-The Mercury Woodworker
-Chris Simonton
-Maddux Woodworks YT: http://bit.ly/3chHe2p
-Byrom’s Custom Woodworks
-Ray Jolliff
-Ryder Clark
-Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/
-Henry Lootens (@Manfaritawood)
-Kris
-Ben Wilker with Wilker’s Woodcraft
-Bruce Clark
-Tommy Trease
-Will White
-Cody Elkins (maker of the Jenny bit)
-Monkey Business Woodworks
Support our sponsors:MagSwitch: https://mag-tools.com
-use code "WBAT" for 10% off
SurfPrep: https://www.surfprepsanding.com/?aff=48
-use code "BLACKFRIDAY2023" for 15% off & "CYBERMONDAY2023" for 15% off
Bits & Bits: use code "FISHER10" for 10% off
Starbond: use code "BRUCEAULRICH15" for 15% off
Rotoboss: "GUNFLINT"
Merlin Moisture Meters: https://www.merlin-humidification.com/wood-moisture-meters
Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off
Arbortech Carving Tools: "BRUCEAULRICH" for 10% off. (https://arbortechtools.idevaffiliate.com/127.html)
Montana Brand Tools: “GUNFLINT10”
Monport: “GUNFLINT6”
We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support)
https://amzn.to/2GP04jf
https://amzn.to/2TUrCr2
ETSY SHOPS:
Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486
Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766
Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect
Bruce's most recent video:
https://youtu.be/xRFe5bELcyE?si=rXBq3csbaaBq7quz
Drew's most recent video:
https://youtu.be/uVlsKXiIoXo?si=7C3E3sYKkZz6uPIV
Mark's most recent video:
https://youtu.be/a701NsPo4ss?si=96H_AiQVVNV1YvbL
We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between. CONNECT WITH US:
WE BUILT A THING: www.instagram.com/webuiltathing
WE BUILT A THING EMAIL: [email protected]
FISHER'S SHOP: www.instagram.com/fishersshop/
BRUDADDY: www.instagram.com/brudaddy/
GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesignsMusic by: Jay Fisher (Thanks, Jay!)
-
In this episode, Mark contemplates buying a nibbler. Bruce gets wrecked by his tractor shed. Drew is nearing the end with his hexagon organizers. Plus a ton more!
T-shirts: https://fishersshoponline.com/merch & https://www.bruceaulrich.com/shop/clothingSUBSCRIBE TO DIRTtoDONE on YouTube: http://tinyurl.com/DIRTtoDON
This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/
(we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!)
Become a patron of the show!
http://patreon.com/webuiltathing
OUR TOP PATREON SUPPORTERS:
-Tom's Woodwork
-Tim Morrill
-Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv
-Brent Jarvis: https://bit.ly/2OJL7EV
-The Mercury Woodworker
-Chris Simonton
-Maddux Woodworks YT: http://bit.ly/3chHe2p
-Byrom’s Custom Woodworks
-Ray Jolliff
-Ryder Clark
-Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/
-Henry Lootens (@Manfaritawood)
-Kris
-Ben Wilker with Wilker’s Woodcraft
-Bruce Clark
-Tommy Trease
-Will White
-Cody Elkins (maker of the Jenny bit)
-Monkey Business Woodworks
New:
-Stephen Goggin
Support our sponsors:MagSwitch: https://mag-tools.com
-use code "WBAT" for 10% off
SurfPrep: https://www.surfprepsanding.com/?aff=48
-use code "BLACKFRIDAY2023" for 15% off & "CYBERMONDAY2023" for 15% off
Bits & Bits: use code "FISHER10" for 10% off
Starbond: use code "BRUCEAULRICH15" for 15% off
Rotoboss: "GUNFLINT"
Merlin Moisture Meters: https://www.merlin-humidification.com/wood-moisture-meters
Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off
Arbortech Carving Tools: "BRUCEAULRICH" for 10% off. (https://arbortechtools.idevaffiliate.com/127.html)
Montana Brand Tools: “GUNFLINT10”
Monport: “GUNFLINT6”
We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support)
https://amzn.to/2GP04jf
https://amzn.to/2TUrCr2
ETSY SHOPS:
Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486
Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766
Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect
Bruce's most recent video:
https://youtu.be/xRFe5bELcyE?si=rXBq3csbaaBq7quz
Drew's most recent video:
https://youtu.be/uVlsKXiIoXo?si=7C3E3sYKkZz6uPIV
Mark's most recent video:
https://youtu.be/a701NsPo4ss?si=96H_AiQVVNV1YvbL
We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between. CONNECT WITH US:
WE BUILT A THING: www.instagram.com/webuiltathing
WE BUILT A THING EMAIL: [email protected]
FISHER'S SHOP: www.instagram.com/fishersshop/
BRUDADDY: www.instagram.com/brudaddy/
GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesignsMusic by: Jay Fisher (Thanks, Jay!)
-
In this episode, Bruce hauls woven driveway fabric. Mark killed a Makita. Drew tries to translate German. Plus a ton more!
T-shirts: https://fishersshoponline.com/merch & https://www.bruceaulrich.com/shop/clothing German Video: https://www.youtube.com/watch?v=IfiBLHDsYGYSUBSCRIBE TO DIRTtoDONE on YouTube: http://tinyurl.com/DIRTtoDON
This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/
(we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!)
Become a patron of the show!
http://patreon.com/webuiltathing
OUR TOP PATREON SUPPORTERS:
-Tom's Woodwork
-Tim Morrill
-Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv
-Brent Jarvis: https://bit.ly/2OJL7EV
-The Mercury Woodworker
-Chris Simonton
-Maddux Woodworks YT: http://bit.ly/3chHe2p
-Byrom’s Custom Woodworks
-Ray Jolliff
-Ryder Clark
-Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/
-Henry Lootens (@Manfaritawood)
-Kris
-Ben Wilker with Wilker’s Woodcraft
-Bruce Clark
-Tommy Trease
-Will White
-Cody Elkins (maker of the Jenny bit)
-Monkey Business Woodworks
Support our sponsors:MagSwitch: https://mag-tools.com
-use code "WBAT" for 10% off
SurfPrep: https://www.surfprepsanding.com/?aff=48
-use code "BLACKFRIDAY2023" for 15% off & "CYBERMONDAY2023" for 15% off
Bits & Bits: use code "FISHER10" for 10% off
Starbond: use code "BRUCEAULRICH15" for 15% off
Rotoboss: "GUNFLINT"
Merlin Moisture Meters: https://www.merlin-humidification.com/wood-moisture-meters
Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off
Arbortech Carving Tools: "BRUCEAULRICH" for 10% off. (https://arbortechtools.idevaffiliate.com/127.html)
Montana Brand Tools: “GUNFLINT10”
Monport: “GUNFLINT6”
We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support)
https://amzn.to/2GP04jf
https://amzn.to/2TUrCr2
ETSY SHOPS:
Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486
Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766
Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect
Bruce's most recent video:
https://youtu.be/xRFe5bELcyE?si=rXBq3csbaaBq7quz
Drew's most recent video:
https://youtu.be/uVlsKXiIoXo?si=7C3E3sYKkZz6uPIV
Mark's most recent video:
https://youtu.be/a701NsPo4ss?si=96H_AiQVVNV1YvbL
We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between. CONNECT WITH US:
WE BUILT A THING: www.instagram.com/webuiltathing
WE BUILT A THING EMAIL: [email protected]
FISHER'S SHOP: www.instagram.com/fishersshop/
BRUDADDY: www.instagram.com/brudaddy/
GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesignsMusic by: Jay Fisher (Thanks, Jay!)
-
In this episode, Bruce pours 21 gallons of epoxy. Mark's concealment cabinets are spawning (He's making more versions). Drew has a non-video project. Plus a ton more!
SUBSCRIBE TO DIRTtoDONE on YouTube: http://tinyurl.com/DIRTtoDON
This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/
(we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!)
Become a patron of the show!
http://patreon.com/webuiltathing
OUR TOP PATREON SUPPORTERS:
-Tom's Woodwork
-Tim Morrill
-Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv
-Brent Jarvis: https://bit.ly/2OJL7EV
-The Mercury Woodworker
-Chris Simonton
-Maddux Woodworks YT: http://bit.ly/3chHe2p
-Byrom’s Custom Woodworks
-Ray Jolliff
-Ryder Clark
-Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/
-Henry Lootens (@Manfaritawood)
-Kris
-Ben Wilker with Wilker’s Woodcraft
-Bruce Clark
-Tommy Trease
-Will White
-Cody Elkins (maker of the Jenny bit)
-Monkey Business Woodworks
Support our sponsors:MagSwitch: https://mag-tools.com
-use code "WBAT" for 10% off
SurfPrep: https://www.surfprepsanding.com/?aff=48
-use code "BLACKFRIDAY2023" for 15% off & "CYBERMONDAY2023" for 15% off
Bits & Bits: use code "FISHER10" for 10% off
Starbond: use code "BRUCEAULRICH15" for 15% off
Rotoboss: "GUNFLINT"
Merlin Moisture Meters: https://www.merlin-humidification.com/wood-moisture-meters
Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off
Arbortech Carving Tools: "BRUCEAULRICH" for 10% off. (https://arbortechtools.idevaffiliate.com/127.html)
Montana Brand Tools: “GUNFLINT10”
Monport: “GUNFLINT6”
We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support)
https://amzn.to/2GP04jf
https://amzn.to/2TUrCr2
ETSY SHOPS:
Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486
Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766
Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect
Bruce's most recent video:
https://youtu.be/xRFe5bELcyE?si=rXBq3csbaaBq7quz
Drew's most recent video:
https://youtu.be/uVlsKXiIoXo?si=7C3E3sYKkZz6uPIV
Mark's most recent video:
https://youtu.be/a701NsPo4ss?si=96H_AiQVVNV1YvbL
We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between. CONNECT WITH US:
WE BUILT A THING: www.instagram.com/webuiltathing
WE BUILT A THING EMAIL: [email protected]
FISHER'S SHOP: www.instagram.com/fishersshop/
BRUDADDY: www.instagram.com/brudaddy/
GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesignsMusic by: Jay Fisher (Thanks, Jay!)
-
In this episode, Bruce gets the lap siding installed on the tractor shed and paints it. Then, he turns his attention to a maple table build. Mark, is setting his sights on the gun show, prepping things for that show. His concealment cabinets are sure to be a big hit. Drew is pushing hard to get the video and plans done for his Japanese-inspired bench. Plus a ton more!
SUBSCRIBE TO DIRTtoDONE on YouTube: http://tinyurl.com/DIRTtoDON
This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/
(we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!)
Become a patron of the show!
http://patreon.com/webuiltathing
OUR TOP PATREON SUPPORTERS:
-Tom's Woodwork
-Tim Morrill
-Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv
-Brent Jarvis: https://bit.ly/2OJL7EV
-The Mercury Woodworker
-Chris Simonton
-Maddux Woodworks YT: http://bit.ly/3chHe2p
-Byrom’s Custom Woodworks
-Ray Jolliff
-Ryder Clark
-Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/
-Henry Lootens (@Manfaritawood)
-Kris
-Ben Wilker with Wilker’s Woodcraft
-Bruce Clark
-Tommy Trease
-Will White
-Cody Elkins (maker of the Jenny bit)
-Monkey Business Woodworks
Support our sponsors:MagSwitch: https://mag-tools.com
-use code "WBAT" for 10% off
SurfPrep: https://www.surfprepsanding.com/?aff=48
-use code "BLACKFRIDAY2023" for 15% off & "CYBERMONDAY2023" for 15% off
Bits & Bits: use code "FISHER10" for 10% off
Starbond: use code "BRUCEAULRICH15" for 15% off
Rotoboss: "GUNFLINT"
Merlin Moisture Meters: https://www.merlin-humidification.com/wood-moisture-meters
Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off
Arbortech Carving Tools: "BRUCEAULRICH" for 10% off. (https://arbortechtools.idevaffiliate.com/127.html)
Montana Brand Tools: “GUNFLINT10”
Monport: “GUNFLINT6”
We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support)
https://amzn.to/2GP04jf
https://amzn.to/2TUrCr2
ETSY SHOPS:
Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486
Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766
Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect
Bruce's most recent video:
https://youtu.be/xRFe5bELcyE?si=rXBq3csbaaBq7quz
Drew's most recent video:
https://youtu.be/nqvLgQhX72o?si=Y65hk5dFKNUSMvrQ
Mark's most recent video:
https://youtu.be/a701NsPo4ss?si=96H_AiQVVNV1YvbL
We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between. CONNECT WITH US:
WE BUILT A THING: www.instagram.com/webuiltathing
WE BUILT A THING EMAIL: [email protected]
FISHER'S SHOP: www.instagram.com/fishersshop/
BRUDADDY: www.instagram.com/brudaddy/
GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesignsMusic by: Jay Fisher (Thanks, Jay!)
-
In this episode, Bruce gets trusses up on the tractor shed. Mark, put out a video on making that cherry vanity. Check it out here: https://youtu.be/zWYdjtAdQ6I?si=k5skonX-eLlLL6tw . Drew is partnering with Oneida to giveaway 3 Low Pro Dust Deputies...enter here: https://bit.ly/fsgiveaway1 . Plus a ton more!
Solafide Designs on Etsy: https://www.etsy.com/shop/SolaFideDesignsKSUBSCRIBE TO DIRTtoDONE on YouTube: http://tinyurl.com/DIRTtoDON
This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/
(we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!)
Become a patron of the show!
http://patreon.com/webuiltathing
OUR TOP PATREON SUPPORTERS:
-Tom's Woodwork
-Tim Morrill
-Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv
-Brent Jarvis: https://bit.ly/2OJL7EV
-The Mercury Woodworker
-Chris Simonton
-Maddux Woodworks YT: http://bit.ly/3chHe2p
-Byrom’s Custom Woodworks
-Ray Jolliff
-Ryder Clark
-Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/
-Henry Lootens (@Manfaritawood)
-Kris
-Ben Wilker with Wilker’s Woodcraft
-Bruce Clark
-Tommy Trease
-Will White
-Cody Elkins (maker of the Jenny bit)
-Monkey Business Woodworks
Support our sponsors:MagSwitch: https://mag-tools.com
-use code "WBAT" for 10% off
SurfPrep: https://www.surfprepsanding.com/?aff=48
-use code "BLACKFRIDAY2023" for 15% off & "CYBERMONDAY2023" for 15% off
Bits & Bits: use code "FISHER10" for 10% off
Starbond: use code "BRUCEAULRICH15" for 15% off
Rotoboss: "GUNFLINT"
Merlin Moisture Meters: Automatic discount when you checkout on Black Friday: https://www.merlin-humidification.com/wood-moisture-meters
Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off
Arbortech Carving Tools: "BRUCEAULRICH" for 10% off. (https://arbortechtools.idevaffiliate.com/127.html)
We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support)
https://amzn.to/2GP04jf
https://amzn.to/2TUrCr2
ETSY SHOPS:
Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486
Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766
Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect
Bruce's most recent video:
https://youtu.be/xRFe5bELcyE?si=rXBq3csbaaBq7quz
Drew's most recent video:
https://youtu.be/nqvLgQhX72o?si=Y65hk5dFKNUSMvrQ
Mark's most recent video:
https://youtu.be/a701NsPo4ss?si=96H_AiQVVNV1YvbL
We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between. CONNECT WITH US:
WE BUILT A THING: www.instagram.com/webuiltathing
WE BUILT A THING EMAIL: [email protected]
FISHER'S SHOP: www.instagram.com/fishersshop/
BRUDADDY: www.instagram.com/brudaddy/
GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesignsMusic by: Jay Fisher (Thanks, Jay!)
-
In this episode, Mark uses his chickens to find when something is level. Bruce uses an ACTUAL laser level for the first time. Drew outfits his OneFinity with dust collection. Plus a ton more!
Solafide Designs on Etsy: https://www.etsy.com/shop/SolaFideDesignsKSUBSCRIBE TO DIRTtoDONE on YouTube: http://tinyurl.com/DIRTtoDON
This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/
(we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!)
Become a patron of the show!
http://patreon.com/webuiltathing
OUR TOP PATREON SUPPORTERS:
-Tom's Woodwork
-Tim Morrill
-Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv
-Brent Jarvis: https://bit.ly/2OJL7EV
-Chris Simonton
-Maddux Woodworks YT: http://bit.ly/3chHe2p
-Byrom’s Custom Woodworks
-Ray Jolliff
-Ryder Clark
-Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/
-Henry Lootens (@Manfaritawood)
-Kris
-Ben Wilker with Wilker’s Woodcraft
-Bruce Clark
-Matt @ Wackey Worx
-Tommy Trease
-Will White
-Cody Elkins (maker of the Jenny bit)
-Monkey Business Woodworks
New:
Aaron @ 4T6 Designs
Support our sponsors:MagSwitch: https://mag-tools.com
-use code "WBAT" for 10% off
SurfPrep: https://www.surfprepsanding.com/?aff=48
-use code "BLACKFRIDAY2023" for 15% off & "CYBERMONDAY2023" for 15% off
Bits & Bits: use code "FISHER10" for 10% off
Starbond: use code "BRUCEAULRICH15" for 15% off
Rotoboss: "GUNFLINT"
Merlin Moisture Meters: Automatic discount when you checkout on Black Friday: https://www.merlin-humidification.com/wood-moisture-meters
Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off
Arbortech Carving Tools: "BRUCEAULRICH" for 10% off. (https://arbortechtools.idevaffiliate.com/127.html)
We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support)
https://amzn.to/2GP04jf
https://amzn.to/2TUrCr2
ETSY SHOPS:
Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486
Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766
Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect
Bruce's most recent video:
https://youtu.be/xRFe5bELcyE?si=rXBq3csbaaBq7quz
Drew's most recent video:
https://youtu.be/nqvLgQhX72o?si=Y65hk5dFKNUSMvrQ
Mark's most recent video:
https://youtu.be/a701NsPo4ss?si=96H_AiQVVNV1YvbL
We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between. CONNECT WITH US:
WE BUILT A THING: www.instagram.com/webuiltathing
WE BUILT A THING EMAIL: [email protected]
FISHER'S SHOP: www.instagram.com/fishersshop/
BRUDADDY: www.instagram.com/brudaddy/
GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesignsMusic by: Jay Fisher (Thanks, Jay!)
-
In this episode, Mark discusses the process of pouring an epoxy vanity top that looks like marble. Bruce uses lag bolts as floating shelf hardware. The guys answer a question about drum sanders eating sandpaper. Drew sells his old router lift...and it did NOT go as expected. Plus a ton more!
SUBSCRIBE TO DIRTtoDONE on YouTube: http://tinyurl.com/DIRTtoDON
This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/
(we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!)
Become a patron of the show!
http://patreon.com/webuiltathing
OUR TOP PATREON SUPPORTERS:
-Tom's Woodwork
-Tim Morrill
-Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv
-Brent Jarvis: https://bit.ly/2OJL7EV
-Chris Simonton
-Maddux Woodworks YT: http://bit.ly/3chHe2p
-Byrom’s Custom Woodworks
-Ray Jolliff
-Ryder Clark
-Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/
-Henry Lootens (@Manfaritawood)
-Kris
-Ben Wilker with Wilker’s Woodcraft
-Bruce Clark
-Matt @ Wackey Worx
-Tommy Trease
-Will White
-Cody Elkins (maker of the Jenny bit)
-Monkey Business Woodworks
Support our sponsors:MagSwitch: https://mag-tools.com
-use code "WBAT" for 10% off
SurfPrep: https://www.surfprepsanding.com/?aff=48
-use code "BLACKFRIDAY2023" for 15% off & "CYBERMONDAY2023" for 15% off
Bits & Bits: use code "FISHER10" for 10% off
Starbond: use code "BRUCEAULRICH15" for 15% off
Rotoboss: "GUNFLINT"
Merlin Moisture Meters: Automatic discount when you checkout on Black Friday: https://www.merlin-humidification.com/wood-moisture-meters
Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off
Arbortech Carving Tools: "BRUCEAULRICH" for 10% off. (https://arbortechtools.idevaffiliate.com/127.html)
We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support)
https://amzn.to/2GP04jf
https://amzn.to/2TUrCr2
ETSY SHOPS:
Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486
Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766
Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect
Bruce's most recent video:
https://youtu.be/xRFe5bELcyE?si=rXBq3csbaaBq7quz
Drew's most recent video:
https://youtu.be/nqvLgQhX72o?si=Y65hk5dFKNUSMvrQ
Mark's most recent video:
https://youtu.be/a701NsPo4ss?si=96H_AiQVVNV1YvbL
We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between. CONNECT WITH US:
WE BUILT A THING: www.instagram.com/webuiltathing
WE BUILT A THING EMAIL: [email protected]
FISHER'S SHOP: www.instagram.com/fishersshop/
BRUDADDY: www.instagram.com/brudaddy/
GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesignsMusic by: Jay Fisher (Thanks, Jay!)
-
In this episode, Mark gets all of the snow from Canada. Also, he makes good progress building the dovetail cherry vanity. Bruce upgrades his dust collector and put out a video about it: https://youtu.be/xRFe5bELcyE?si=rXBq3csbaaBq7quz . Drew is working on a ton of those gaming trays for the local business in all different wood species. Plus a ton more!
SUBSCRIBE TO DIRTtoDONE on YouTube: http://tinyurl.com/DIRTtoDON
This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/
(we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!)
Become a patron of the show!
http://patreon.com/webuiltathing
OUR TOP PATREON SUPPORTERS:
-Tom's Woodwork
-Tim Morrill
-Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv
-Brent Jarvis: https://bit.ly/2OJL7EV
-Chris Simonton
-Maddux Woodworks YT: http://bit.ly/3chHe2p
-Byrom’s Custom Woodworks
-Ray Jolliff
-Ryder Clark
-Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/
-Henry Lootens (@Manfaritawood)
-Kris
-Ben Wilker with Wilker’s Woodcraft
-Bruce Clark
-Matt @ Wackey Worx
-Tommy Trease
-Will White
-Cody Elkins (maker of the Jenny bit)
-Monkey Business Woodworks
Support our sponsors:MagSwitch: https://mag-tools.com
-use code "WBAT" for 10% off
SurfPrep: https://www.surfprepsanding.com/?aff=48
-use code "BLACKFRIDAY2023" for 15% off & "CYBERMONDAY2023" for 15% off
Bits & Bits: use code "FISHER10" for 10% off
Starbond: use code "BRUCEAULRICH15" for 15% off
Rotoboss: "GUNFLINT"
Merlin Moisture Meters: Automatic discount when you checkout on Black Friday: https://www.merlin-humidification.com/wood-moisture-meters
Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off
Arbortech Carving Tools: "BRUCEAULRICH" for 10% off. (https://arbortechtools.idevaffiliate.com/127.html)
We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support)
https://amzn.to/2GP04jf
https://amzn.to/2TUrCr2
ETSY SHOPS:
Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486
Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766
Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect
Bruce's most recent video:
https://youtu.be/xRFe5bELcyE?si=rXBq3csbaaBq7quz
Drew's most recent video:
https://youtu.be/nqvLgQhX72o?si=Y65hk5dFKNUSMvrQ
Mark's most recent video:
https://youtu.be/a701NsPo4ss?si=96H_AiQVVNV1YvbL
We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between. CONNECT WITH US:
WE BUILT A THING: www.instagram.com/webuiltathing
WE BUILT A THING EMAIL: [email protected]
FISHER'S SHOP: www.instagram.com/fishersshop/
BRUDADDY: www.instagram.com/brudaddy/
GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesignsMusic by: Jay Fisher (Thanks, Jay!)
-
In this episode, Mark makes good progress with the bathroom vanity...it's like a huge dovetail. Bruce mixes a ton of concrete and gets the tractor shed posts put in. Drew released his slab headboard video...go check it out: https://youtu.be/nqvLgQhX72o?si=aAbBGUhQKyYzbWNY. Plus a ton more!
SUBSCRIBE TO DIRTtoDONE on YouTube: http://tinyurl.com/DIRTtoDON
This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/
(we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!)
Become a patron of the show!
http://patreon.com/webuiltathing
OUR TOP PATREON SUPPORTERS:
-Tom's Woodwork
-Tim Morrill
-Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv
-Brent Jarvis: https://bit.ly/2OJL7EV
-Chris Simonton
-Maddux Woodworks YT: http://bit.ly/3chHe2p
-Byrom’s Custom Woodworks
-Ray Jolliff
-Ryder Clark
-Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/
-Henry Lootens (@Manfaritawood)
-Kris
-Ben Wilker with Wilker’s Woodcraft
-Camp27
-Bruce Clark
-Matt @ Wackey Worx
-Tommy Trease
-Will White
-Cody Elkins (maker of the Jenny bit)
-Monkey Business Woodworks
New:
-Keith
-Wind & Fire Woodwork
Support our sponsors:MagSwitch: https://mag-tools.com
-use code "WBAT" for 10% off
SurfPrep: https://www.surfprepsanding.com/?aff=48
-use code "BLACKFRIDAY2023" for 15% off & "CYBERMONDAY2023" for 15% off
Bits & Bits: use code "FISHER10" for 10% off
Starbond: use code "BRUCEAULRICH15" for 15% off
Rotoboss: "GUNFLINT"
Merlin Moisture Meters: Automatic discount when you checkout on Black Friday: https://www.merlin-humidification.com/wood-moisture-meters
Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off
Arbortech Carving Tools: "BRUCEAULRICH" for 10% off. (https://arbortechtools.idevaffiliate.com/127.html)
We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support)
https://amzn.to/2GP04jf
https://amzn.to/2TUrCr2
ETSY SHOPS:
Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486
Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766
Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect
Bruce's most recent video:
https://youtu.be/fFhx8z6Sngs?si=qNHJ7dnwf9ailqwR
Drew's most recent video:
https://youtu.be/nqvLgQhX72o?si=aAbBGUhQKyYzbWNY
Mark's most recent video:
https://youtu.be/a701NsPo4ss?si=pSNjXP8BfxGKUj5W
We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between. CONNECT WITH US:
WE BUILT A THING: www.instagram.com/webuiltathing
WE BUILT A THING EMAIL: [email protected]
FISHER'S SHOP: www.instagram.com/fishersshop/
BRUDADDY: www.instagram.com/brudaddy/
GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesignsMusic by: Jay Fisher (Thanks, Jay!)
-
In this episode, Mark receives a computer through a portal. Bruce published the video about the chicken sign (watch here: https://youtu.be/fFhx8z6Sngs?si=3zLdI_uXt4BypJpD ) Drew's slab headboard video is about to be out. Plus a ton more!
SUBSCRIBE TO DIRTtoDONE on YouTube: http://tinyurl.com/DIRTtoDON
This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/
(we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!)
Become a patron of the show!
http://patreon.com/webuiltathing
OUR TOP PATREON SUPPORTERS:
-Tom's Woodwork
-Tim Morrill
-Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv
-Brent Jarvis: https://bit.ly/2OJL7EV
-Chris Simonton
-Maddux Woodworks YT: http://bit.ly/3chHe2p
-Byrom’s Custom Woodworks
-Ray Jolliff
-Ryder Clark
-Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/
-Henry Lootens (@Manfaritawood)
-Kris
-Ben Wilker with Wilker’s Woodcraft
-Camp27
-Bruce Clark
-Matt @ Wackey Worx
-Tommy Trease
-Will White
-Cody Elkins (maker of the Jenny bit)
-Monkey Business Woodworks
Support our sponsors:MagSwitch: https://mag-tools.com
-use code "WBAT" for 10% off
SurfPrep: https://www.surfprepsanding.com/?aff=48
-use code "BLACKFRIDAY2023" for 15% off & "CYBERMONDAY2023" for 15% off
Bits & Bits: use code "FISHER10" for 10% off
Starbond: use code "BRUCEAULRICH15" for 15% off
Rotoboss: "GUNFLINT"
Merlin Moisture Meters: Automatic discount when you checkout on Black Friday: https://www.merlin-humidification.com/wood-moisture-meters
Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off
Arbortech Carving Tools: "BRUCEAULRICH" for 10% off. (https://arbortechtools.idevaffiliate.com/127.html)
We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support)
https://amzn.to/2GP04jf
https://amzn.to/2TUrCr2
ETSY SHOPS:
Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486
Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766
Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect
Bruce's most recent video:
https://youtu.be/fFhx8z6Sngs?si=qNHJ7dnwf9ailqwR
Drew's most recent video:
https://youtu.be/p4G0HPB2syY?si=mYVgJA4zmUNSd6OI
Mark's most recent video:
https://youtu.be/ZqnhjSxhg10
We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between. CONNECT WITH US:
WE BUILT A THING: www.instagram.com/webuiltathing
WE BUILT A THING EMAIL: [email protected]
FISHER'S SHOP: www.instagram.com/fishersshop/
BRUDADDY: www.instagram.com/brudaddy/
GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesignsMusic by: Jay Fisher (Thanks, Jay!)
-
In this episode, Mark gets his kids into some MeatEater trivia. Bruce delivers the chicken sign and gets a fantastic reaction from his neighbors. Drew gets....sick from his son. Plus a ton more!
SUBSCRIBE TO DIRTtoDONE on YouTube: http://tinyurl.com/DIRTtoDON
This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/
(we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!)
Become a patron of the show!
http://patreon.com/webuiltathing
OUR TOP PATREON SUPPORTERS:
-Tom's Woodwork
-Tim Morrill
-Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv
-Brent Jarvis: https://bit.ly/2OJL7EV
-Chris Simonton
-Maddux Woodworks YT: http://bit.ly/3chHe2p
-Byrom’s Custom Woodworks
-Ray Jolliff
-Ryder Clark
-Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/
-Henry Lootens (@Manfaritawood)
-Kris
-Ben Wilker with Wilker’s Woodcraft
-Camp27
-Bruce Clark
-Matt @ Wackey Worx
-Tommy Trease
-Will White
-Cody Elkins (maker of the Jenny bit)
-Monkey Business Woodworks
Support our sponsors:MagSwitch: https://mag-tools.com
-use code "WBAT" for 10% off
SurfPrep: https://www.surfprepsanding.com/?aff=48
-use code "BLACKFRIDAY2023" for 15% off & "CYBERMONDAY2023" for 15% off
Bits & Bits: use code "FISHER10" for 10% off
Starbond: use code "BRUCEAULRICH15" for 15% off
Rotoboss: "GUNFLINT"
Merlin Moisture Meters: Automatic discount when you checkout on Black Friday: https://www.merlin-humidification.com/wood-moisture-meters
Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off
Arbortech Carving Tools: "BRUCEAULRICH" for 10% off. (https://arbortechtools.idevaffiliate.com/127.html)
We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support)
https://amzn.to/2GP04jf
https://amzn.to/2TUrCr2
ETSY SHOPS:
Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486
Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766
Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect
Bruce's most recent video:
https://youtu.be/T90cTjs5ba8?si=vql5ROkbZCSs5QZA
Drew's most recent video:
https://youtu.be/yRZdyQZlheI?si=ExNTAGHYOKue_sqc
Mark's most recent video:
https://youtu.be/ZqnhjSxhg10
We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between. CONNECT WITH US:
WE BUILT A THING: www.instagram.com/webuiltathing
WE BUILT A THING EMAIL: [email protected]
FISHER'S SHOP: www.instagram.com/fishersshop/
BRUDADDY: www.instagram.com/brudaddy/
GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesignsMusic by: Jay Fisher (Thanks, Jay!)
- Visa fler