Avsnitt
-
Service Bonding Questions
Become a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support. -
Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, as he answers more questions from the Let’s Ask Paul Portal over at www.PaulAbernathy.com.
In this episode, Paul will tackle the questions submitted by a listener. The topic covered in this episode is when to use the nameplate or 5KW for dryer calculations depending on the standard or optional method of calculating the load for a service. We also tackle the issue of the 2-6 disconnect rule in 230.71 in the 2020 National Electrical Code for an inspector in California.
If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.
Become a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support. -
Saknas det avsnitt?
-
Will the GFCI or OCPD to the GFCI Function on a Ground Fault?
Become a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support. -
Facebook has gone CRAZY!
Become a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support. -
Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, as he answers more questions from the Let’s Ask Paul Portal over at www.PaulAbernathy.com.
In this episode, Paul will tackle the questions submitted by a listener. The topic covered in this episode is the relationship of direct and inverse proportion to voltage, current, resistance, and power when using Ohm Law and Power Formulas. Now, I am not the BEST at electrical theory so I will try and break it down into understandable analogies to help hammer the principles home.
If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.
Become a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support. -
Ground Rods and Parking Lot Light Poles...Say What
Become a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support. -
Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, as he answers more questions from the Let’s Ask Paul Portal over at www.PaulAbernathy.com.
In this episode, Paul will tackle the questions submitted by a listener. The topic covered in this episode is the use of multiple EGC’s or a single EGC for multiple branch circuits and Disconnect Ratings for Detached Structures or Buildings supplied by a feeder.
If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.
Become a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support. -
Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, as he answers more questions from the Let’s Ask Paul Portal over at www.PaulAbernathy.com.
In this episode, Paul will tackle the questions submitted by a listener. The topic covered in this episode is about how to calculate the service or feeder load calculations for a school using the optional method in 220.86 of the 2023 National Electrical Code.
If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.
Become a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support. -
Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, as he answers more questions from the Let’s Ask Paul Portal over at www.PaulAbernathy.com.
In this episode, Paul will tackle the questions submitted by a listener. The topic covered in this episode is how to calculate the primary and secondary amperes for a single phase as we as three-phase transformers. We will also discuss loading a transformer and a basic calculation that how that takes place. As always podcasts can be hard to follow so make sure you listen first and then come back later with a pen and paper and work on some of the examples discussed in this episode.
If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.
Become a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support. -
Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, as he answers more questions from the Let’s Ask Paul Portal over at www.PaulAbernathy.com.
In this episode, Paul will tackle the questions submitted by a listener. The topic covered in this episode is how to find the Horsepower in DC, and Single and Three Phase exam questions that are simply trying to find a horsepower value. As always, podcasts can be hard to follow so make sure you listen first and then come back later with a pen and paper and work on some of the examples discussed in this episode.
If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.
Become a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support. -
Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, as he answers more questions from the Let’s Ask Paul Portal over at www.PaulAbernathy.com.
In this episode, Paul will tackle the questions submitted by a listener. The topic covered in this episode is how to perform ampere calculations when factors such as Horsepower, Kilowatts, Voltages, Power Factors, and so forth are given in terms of a question on an exam that simply wants to know the ampere values of a specific question. As always, podcasts can be hard to follow so make sure you listen first and then come back later with a pen and paper and work on some of the examples discussed in this episode.
If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.
Become a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support. -
Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, as he answers more questions from the Let’s Ask Paul Portal over at www.PaulAbernathy.com.
In this episode, Paul will tackle the questions submitted by a listener. The topic covered in this episode is about how to perform Series and Parallel Circuit calculations. In this episode, we will talk about how to find the amps, ohms (resistance), and voltage calculations in combination series and parallel circuits. As always, podcasts can be hard to follow so make sure you listen first and then come back later with a pen and paper and work on some of the examples discussed in this episode.
If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.
Become a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support. -
Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, as he answers more questions from the Let’s Ask Paul Portal over at www.PaulAbernathy.com.
In this episode, Paul will tackle the questions submitted by a listener. The topic covered in this episode is to discuss how to perform Parallel Circuit calculations. In this episode, we will talk about how to find the amps, ohms (resistance), and voltage calculations in parallel circuits. Now as always, podcasts can be hard to follow so make sure you listen first and then come back later with a pen and paper and work on some of the examples discussed in this episode.
If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the plane
Become a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support. -
Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, as he answers more questions from the Let’s Ask Paul Portal over at www.PaulAbernathy.com.
In this episode, Paul will tackle the questions submitted by a listener. The topic covered in this episode is about how to perform Series Circuit calculations. In this episode, we will talk about how to find the amps, ohms (resistance), and voltage calculations in series circuits. Now as always, podcasts can be hard to follow so make sure you listen first and then come back later with a pen and paper and work on some of the examples discussed in this episode.
If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.
Become a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support. -
Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, as he answers more questions from the Let’s Ask Paul Portal over at www.PaulAbernathy.com.
In this episode, Paul will tackle the questions submitted by a listener. The topic covered in this episode is how to perform Ohm's law calculations. In this episode, we will discuss finding the amps, ohms (resistance), and voltage calculations. As always, podcasts can be hard to follow so make sure you listen first and then come back later with a pen and paper and work on some of the examples discussed in this episode.
If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.
Become a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support. -
Today, we chat about existing loads and when to do a new calculation on an existing dwelling and more on various topics.
Become a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support. -
Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, as he answers more questions from the Let’s Ask Paul Portal over at www.PaulAbernathy.com.
In this episode, Paul will tackle the questions submitted by a listener. The topic covered in this episode is how to perform a calculation for an all-electric restaurant. This is something that has been seen on many electrical exams and is a calculation that is very easy if you know the steps.
If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.
Become a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support. -
Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, as he answers more questions from the Let’s Ask Paul Portal over at www.PaulAbernathy.com.
In this episode, Paul will tackle the questions submitted by a listener. The topic covered in this episode is about how Electrical Vehicle Charging loads are taken into account in load calculation. We will look at the way the 2023 National Electrical Code gives us new direction as well as looking at what the 2020 NEC said and how it would have been applied before the 2023 NEC.
If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.
Become a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support. -
Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, as he answers more questions from the Let’s Ask Paul Portal over at www.PaulAbernathy.com.
In this episode, Paul will tackle the questions submitted by a listener. The topic covered in this episode is the locations of luminaries in specific locations, such as wet or damp locations and in proximity to bathtubs and showers.
If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.
Become a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support. -
Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, as he answers more questions from the Let’s Ask Paul Portal over at www.PaulAbernathy.com.
In this episode, Paul will tackle the questions submitted by a listener. The topic covered in this episode is the reidentification of a conductor in a multiconductor cable for use as the grounded conductor as permitted in 200.6(E) Exception 1. There are folks on social media who are spreading false information as to how this rule is to be applied. So, since Paul Abernathy was in the room when this was being discussed on NFPA Code Making Panel 5, here is Paul’s take on the requirement.
If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.
Become a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support. - Visa fler